Date: Thursday, 02 January 2014 06:10:35 UTC
From: Ralph (VK2FRLT)
Congratulations! A very informative website. Keep up the great work.
Date: Wednesday, 01 January 2014 22:55:21 UTC
From: Martin (OK7MS)
Home page: http://ham.marsik.org
Hi Julian. I have what is probably a "stupid" question about your QFH antenna for NOAA reception.
Every article I found specifies millimeter accuracy. Your howto specifies 221.6cm for the longer loop and 122.15cm for the short halves.
But here comes the question. Is the space needed for soldering the wires accounted for? When you connect two wires, there has to be certain amount of overlap. And when millimeter accuracy is needed, the size of the overlap matters.
Thanks for the website, it contains a lot of interesting information.
I was a bit saddened by your linux article though. I understand the software choice argument and agree with it, but there were too many inaccuracies there about the support for binary distributed software (there are Linux Standard Base, /opt and .local mechanisms..) and you never mentioned the distribution's name.
Date: Friday, 27 December 2013 07:10:38 UTC
From: Duane Cook (NL7X)
Tnx for all your interesting hints and contributions. I hope your health is improving. Seasons Greetings to You and Yours from the Tropical Alaska Interior!
Date: Thursday, 19 December 2013 19:36:38 UTC
Home page: http://www.akka-rov.se
New at this,LEO stuff,
Built your design of qfh and it works fine!
When/if you feel like view my result pictures please do, and comment.
I need feedback :)
Date: Tuesday, 03 December 2013 19:42:50 UTC
From: Terry Morris (KB8AMZ)
Hello Julian, nice stealth setup. I have been QRP operator since 1986 when I received my Novice Ticket. I still own my 1st rig, Heathkit HW-9.
Sorry to hear about your distaste with Linux. I run Linux exclusively and only use Open Source Software in my Amateur Radio hobby. Linux has come a long way since you abandoned it in 2008. But to each his own, just as in this hobby. Some of us like HF CW and some HF Phone, and others only anything above 30 MHz which is one of the principles that makes this hobby so great.
Hope to catch on HF QRP CW someday. 73 OM de KB8AMZ, Terry
Date: Tuesday, 26 November 2013 14:11:22 UTC
From: Mark Richards (K1MGY)
Thanks so very much for your VOAProp software which I discovered this morning while looking for information on the Beacon network. It's brilliantly done and quite a contribution to Amateur Radio.
Your morse training tool is also well done. Although I am naturally proficient my son is just learning at age 11, and I do think this will be of help. So thanks for this, too!
I read of your tumour trouble with sadness and send you my cheers and best wishes.
Date: Saturday, 23 November 2013 23:14:23 UTC
From: Steve (VK4FEEL)
Thank You very much for your propogation predictor very rarely is it ever mistaken, has helped me get some hard to get countries and QSO's.
73's VK4FEEL Steve
Date: Monday, 28 October 2013 17:49:56 UTC
From: Fred Bergman (AE2R)
Thank you for all of the work you have given to the world.
May God bless you
Date: Tuesday, 22 October 2013 05:23:46 UTC
From: Vincent POLIS (KC3AFY)
Thanks for the website. I have been searching for info on this type of ham radio operations. I am a new ham and this site is a real boost for me.
I dont have a lot to spend on a new rig and was thinking about the Yaesu 817 for a base station and portable work...plus I have attic space! So 5 watts is possible to work the world!
Date: Sunday, 20 October 2013 16:01:16 UTC
From: Claude Duchêne (ON5BIP)
Hi, Julian. I'm looking on your website for years. Very interesting ! Thanks therefore. I'm an old technician from telephon and bank cards machines. I've got a FT-817. Because I'm a survivalist, stealth antennas, and so on are my need. Thanks Julian.
Date: Friday, 11 October 2013 16:19:42 UTC
From: Jo (DL1JRM)
I'm glad to read that your op went well! All the very best now for a speedy and good recovery! Olga and yourself are included in my prayers. Get well soon, Jo
Date: Friday, 11 October 2013 02:57:58 UTC
From: JOHN (SWL(HX27UK)
HI JULIAN JUST FOUND YOU ADDRESS REGARDS JOHN
Date: Friday, 11 October 2013 00:24:08 UTC
From: john (SWL(HX27UK))
hope op went ok my sister in similar situation but now on very expensive tablets had op some time ago holding her own,have sent you update re shack and your assistance regards to you an olgar john
Date: Tuesday, 08 October 2013 10:09:05 UTC
From: Colin (DD5CF/G1ZOS)
Hi Julian, just wanted to let you know I have been using your Wonder loop design for a couple of years now and have now crossed the pond with it, running the UQRSS 1 with 200mW on WSPR.
2013-10-08 01:20 DD5CF 10.140148 -24
-1 JO30nq 0.2 W3HH EL89vb 7508 Kms.
Vy 73 Colin
Date: Saturday, 05 October 2013 11:11:17 UTC
I just started HAM radio and I read your reviews which really helped me a lot. And then I read about your health condition.
I hope you get better. I pray for you.
Date: Wednesday, 02 October 2013 21:52:31 UTC
From: peter (G3OJV)
Hi Julian, am thinking of you. You are in my daily prayers for you. Peter
Date: Sunday, 22 September 2013 17:24:47 UTC
From: john bidgood (SWL)
thinking of you and olga regards john
Date: Friday, 13 September 2013 21:43:49 UTC
From: Nicolaus Sallay (PP8DA)
Home page: http://QRZ.com/PP8DA
Hi Juian,I´m replieing this way because I´m uneable to enter the blog.Last News are bad,hope the doc´s will find a way to solve the tumor´s increase and put you feeling better as soon as possible,will check frequently for better News,Keep well, Vy73´s de Nick-PP8DA
Date: Wednesday, 11 September 2013 09:32:16 UTC
From: Stuart (G4WCP)
Have heard you on WSPR , Just bought one of the keyers you use for your ft817 , also gotta a 817., waiting delivery .really enjoy reading your web page , as a keen dig , qrp op
Best wishes Stu
Date: Monday, 09 September 2013 03:08:19 UTC
I read and loved your article about the QFH antenna for the weather satellite band. I wish to do a replica of that, but since I'm quite newbie and dummy about RF and antennas, I have some trouble understanding your instruction :-(
Can you explain better, maybe a tutorial and some good pictures about how to connect the coax cable loops?
Thank you very much!